This kind of heater is used as a heat source such as heaters, air conditioners, and clothes dryers. As long as the cold air is passed through mechanically, the heat source can be easily obtained. Due to the use of PTC elements, even if the air does not flow through, it will not overheat Phenomenon. At the same time, its calorific value will realize the power self-regulation with the change of the inflow air temperature and wind speed, so it is safer and more power-saving than the nickel-chromium wire heater.
Features:
●Due to the use of aluminum radiator, high power can be guaranteed, and the air pressure loss is small
●Even if large air volume is used, power oscillation will not occur, and heat can be stabilized
●Wide voltage application range can be designed as needed between 3V-380V
●Automatically adjust the calorific value according to the changes of ambient temperature and air volume
●Convenient design, can be designed arbitrarily from low power to high power
●No overheating, safe and reliable
Matters needing attention when using:
●The wind speed of 3-4m/s should be selected in the design
●The applied voltage should not exceed the maximum rated voltage
●The heat resistance of the material in contact with the heater should be considered when designing
●Do not use in places where there are dust, solvents, sulfide gas, steam, etc.
●In order to prevent cotton wool and other materials from blocking the air inlet, please install a dust filter at the air inlet
●The electrode terminal temperature rises when the heater is working, please fully consider the reliability of the wiring
●When working, do not touch the heater with your human body or metal pieces to avoid electric shock, burns or damage to the equipment
●Due to the thermal expansion of the heater during operation, there should be a gap of about 1mm between the heater and its installation support parts
